The Anden Model A130 Dehumidifier is designed to dehumidify the air coming into the unit by passing the incoming air over an evaporator coil to drop the air temperature below the dew point of the air. Moisture is removed from the air and drained out of the unit to a common floor or waste drain. The air is then reheated in the condenser coil and exits the unit. Dehumidification occurs until the set point is reached, then shuts off until periodic sampling determines a need for operation.
Control (3): Built-in digital control with display
Control mounting option: Field interchangeable from top to front
Cabinet insulation: 1/2" EPS
Air discharge orientation: Top or end
Inlet/Outlet duct collars: 10" dia.
Backdraft damper at outlet: Included
Filter Washable: MERV 8
Refrigerant :R410A
Coil type: E-coated
Power cord length: 8 ft.
Discharge air temperature rise 10°F-30°F
Drain connection(4) 3/4" MNPT Threaded
Warranty: 5 years
(3)Built-in automatic control capable to be set up for dehumidification and ventilation or zoning. (4)Threaded barbed fitting included.
Included Items
Drain fitting: 3/4" MPT x 3/4" barbed
10' drain tubing: 3/4" ID
Duct collars: 10" round (A130 only)
Manual: Installation instruction
Specifications
Capacity: 130 ppd
Energy factor: 2.8L/kW-h (5.9 pints/kWh)
Voltage, phase, frequency: 120VAC, 1 phase, 60Hz
Current draw(1): 8.3 Amps
Noise: 50 dBA
Unit dimensions (cabinet only): 19.5" P x 18.75" H (21" with casters) x 30" L
Unit weight: 114 lbs
Inlet air operating conditions during: Dehumidification: 50°F-104°F, 40°F dew point min. - Ventilation: 40°F-140°F, 0%-99%RH (non-condensing)
(1)Rated capacity and energy factor test done and current draw measured in accordance with AHAM DH-1 2008 at 80°F/60% Rh inlet air at 0.0 ESP. (2)Height does not include adjustable feet. The width excludes the filter doors and length excludes the duct collars.
