The Anden Model A320V3 Dehumidifier is designed to dehumidify the air coming into the unit by passing the incoming air over an evaporator coil to drop the air temperature below the dew point of the air. Moisture is removed from the air and drained out of the unit to a common floor or waste drain. The air is then reheated in the condenser coil and exits the unit. Dehumidification occurs until the set point is reached, then shuts off until the control determines a need for operation. The Anden Model A320V3 Dehumidifier is the perfect solution for the precise management of humidity required in an indoor growing environment. The Model A320V3 can also be programmed to circulate air within a grow facility. Proper air flow carries moisture away from the plants, helping to prevent fungus, disease and plant pests from damaging the crop. Circulating the air also maximizes the application of CO2 in the grow facility.
Coil type: Copper tube, Aluminum fin with Electro-Fin E-coated
Drain connection (requires drain trap): 3/4" FNPT
P-Trap required: Yes (included)
Leveling feet: No
Hanging brackets: Included
Warranty: 5 years on all parts including refrigeration system
Included items
Control: Model A77
Drain fittings: 3/4" MNPT x 3/4" BARB - 3/4" MNPT x 3/4" Female pipe - 3/4" FNPT x 3/4" Female pipe - 3/4" P-Trap
Drain tubing (length, ID): 10' - 3/4" ID
Thermostat wire: 30' 20 gauge 4-wire
Specifications
Capacity(1) PPD at 80°/60%RH: 315
Energy factor(1): 2.6L/kW-h - 5.5 pints/kWh
Voltage, phase, frequency: 277VAC, 1 phase, 60Hz
Current draw (amps)(1): 9.2
Power (Watts)(1): 2,450
Power cord type and length: SJT, L7-20P, 10ft
Hardwire: Field configurable
Breaker size: 20 amp
CFM: 830
Operating range Temp/RH: 65/50 to 85/80
(1)Rated capacity and energy factor test done and current draw measured in accordance with AHAM DH-1 2008 at 80°F/60% RH inlet air at 0.0 ESP.
(2)Total cooling load.
